1250E

Home | Site Map | Privacy Policy

(808)-668-4720

MAGNABEND™ 1250E

High performance electromagnetic sheet metal folder

Specifications
Nominal capacity	1250 mm x 1.6 mm (4ft x 16g)15 to 635 mm
Clamping force (with standard full-length clamp bar)	6 Tons
Electrical	Supply:	1 phase, 220/240 V ac
	Nominal current:	8 Amp
	Duty cycle:	30%
	Protection:	Thermal cut-out, 70°C

FRONT & SIDE ELEVATIONS , 1250E (mm)

BENDING CAPACITIES (with standard full-length clamp bar)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminum Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm
* With standard bending-beam extension fitted. For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminum above.

Standard accessories include a storage tray, adjustable backstops, and a complete set of short-length clamp-bars.

Optional accessories available include a narrow clamp bar, a slotted clamp bar for forming shallow boxes more quickly, a foot-switch, and a power shear with guide.