3200E

Home | Site Map | Privacy Policy

(808)-668-4720

MAGNABEND™ 3200E

High performance electromagnetic sheet metal folder

Specifications
Nominal capacity	3200 mm x 1.2 mm (10 ft x 18g)
Clamping force (with standard full-length clamp bar)	10 Tons
Electrical	Supply:	1 phase, 220/240 V ac
	Nominal current:	15 Amp
	Duty cycle:	30%
	Protection:	Thermal cut-out, 70°C

FRONT & SIDE ELEVATIONS , 3200E (mm)

BENDING CAPACITIES (with standard full-length clamp bar)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.2 mm	20 mm	2.2 mm
Mild Steel (250/320 MPa)	1.0 mm	15 mm	1.5 mm
Aluminum Grade 5005 H34 (140.160 MPa)	1.2 mm	20 mm	1.2 mm
Aluminum Grade 5005 H34 (140.160 MPa)	1.0 mm	15 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	0.9 mm	20 mm	3.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	0.8 mm	15 mm	1.8 mm
For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminum above.

Standard accessories include foot-switch, storage trays, adjustable backstops, and a set of short-length clamp bars for making boxes.

Optional accessories available include a narrow clamp bar, a slotted clamp bar for forming shallow boxes more conveniently, and a power shear with guide for straight distortion-free cutting of sheet metal up to 18 gauge thick.