Hangers vs. Spikes ... what you need to know
| Spikes leave a 1/4" hole in the fascia |
| Spikes does not hold well |
| Spikes often crack lumber |
| Spikes are not strong |
| Once spikes are loosened it is difficult to reinstall the spike |
| because the hole in the fascia will be larger than the spike. |
| During installation spike may dent the face of the gutter |
| Eventually the gutter will sag and loosen |
| Hangers do not leave large holes in the fascia |
| Hangers hold very well because screws are used |
| Hangers do not crack lumber |
| Hangers are easy to modify and make adjustments |
| Hangers leave a smooth finish to the gutter face |
| Helpful hints: |
| Hangers should be about 32" on center (apart). |
| There should be 3 screws in between hangers. |
| 5" gutter should use #8 stainless steel screws. |
| 6" gutter should use #10 stainless steel screws. |
| Make sure your screws are stainless steel because |
| galvanize screws will rust thru your gutter. |